The sensor is less sensitive to motion directly towards it and more sensitive to motion across coverage area.

Motion

Motion

Sensor

Least Sensitive

Most Sensitive

Adjustment of Coverage Area

The sensor on this light fixture detects “motion” by the movement of heat (body heat) across the coverage area. However, following are examples of objects that also produce heat and can cause the sensor to false trigger:

• Pools of Water

• Air Conditioners

• Dryer Vents

Fenced-In Animals

• Heating Vents

• Automobile Traffic

If you suspect that a heat source of this type is falsely triggering the sensor and reducing the sensitivity does not solve the problem, then a lens shield (included) can be installed. The plastic lens shield is divided into 6 sections. Each section will reduce the coverage angle by 30 degrees. Also, the tip of each section may be removed to change the effective range of the sensor.

Lens

 

Shield

Area

 

Blocked

 

Effective

 

Coverage Area

Lens

(Top View)

Area

Shield

 

Blocked

Portion

Removed

598-1184-04

1.Break off the amount of lens shield needed to block the desired area of coverage.

2.Cut desired amount of foam tape needed to adhere the lens shield to the sensor lens.

3.Remove paper backing from one side of cut foam tape and adhere foam tape to inside of lens shield.

4.Removepaperbackingfromothersideofcutfoam tape and adhere lens shield to sensor lens.

 

NS

ITIVITY

SE

 

 

 

 

 

 

 

 

 

 

- M

- HI

 

LO

 

 

 

 

 

 

 

 

 

 

10

MIN

 

 

1

5 E

 

 

 

 

IM

 

TESTON

-T

 

 

 

 

 

 

Lens Shield

Sensor

 

Lens

5.Retest to confirm that the sensor is no longer false triggering.

Note: To help determine amount of lens shield required, apply small sections one at a time. Ad- ditional sections can be applied if necessary.

SPECIFICATIONS

Range

Up to 30 ft. (9.1 m)

 

[varies with surrounding

 

temperature].

Sensing Angle

360°

Electrical Load

Up to 100 Watt

 

Maximum Tungsten

 

Incandescent (Up to 25

 

Watt Maximum each

 

lampholder).

Bulb Type

Candelabra Base, Type

 

“B”, 25 Watt Maximum

Sensor Capacity

Up to 500 Watt (4.2 A.)

 

Maximum Tungsten

 

Incandescent

Power Requirements

120 VAC, 60 Hz

Operating Modes

TEST, AUTO, and

 

MANUAL MODE

ON-Timer

1, 5, 10 minutes

Page 5
Image 5
Heath Zenith SL-4305 warranty Adjustment of Coverage Area, Specifications

SL-4305 specifications

The Heath Zenith SL-4305 is a highly regarded outdoor motion sensor light designed to enhance security while providing convenience for home and business owners alike. Known for its robust features, this product is ideally suited for various environments, from residential backyards to commercial properties.

One of the standout features of the SL-4305 is its dual-head design, which offers a broad range of illumination, allowing users to cover larger areas effectively. Each head is adjustable, ensuring that light can be directed where it is needed most. The brightness of the LEDs is impressive, providing ample illumination to deter potential intruders and illuminate paths or driveways.

Equipped with advanced motion sensing technology, the SL-4305 features a PIR (Passive Infrared) sensor that detects movement within a specified range. This range can often be adjustable, allowing users to customize the sensor's sensitivity and detection distance. The light can activate automatically when motion is detected, ensuring instant illumination, thereby enhancing safety and security.

Another key characteristic of the SL-4305 is its ease of installation. Designed with user-friendly principles in mind, this motion sensor light can be mounted on walls with minimal effort. With its hardwired design, it requires a connection to a power source, ensuring reliable operation.

The SL-4305 also incorporates various settings that can be adjusted to suit individual needs. Users can typically set the duration for which the light remains on after activation, along with the option to adjust the ambient light sensitivity. This ensures that the light only activates when needed, saving energy and reducing unnecessary light pollution.

Durability is another notable aspect of the Heath Zenith SL-4305. Constructed from weather-resistant materials, this motion sensor light is built to withstand varying outdoor conditions, from rain to snow, ensuring long-lasting performance.

In summary, the Heath Zenith SL-4305 offers an efficient and reliable solution for outdoor illumination. With its dual-head design, advanced motion detection technology, adjustable settings, and weather-resistant build, it provides an optimal combination of security, convenience, and durability for any property. Whether for enhancing safety or simply illuminating dark spaces, the SL-4305 stands out as a premier choice in the market.