Bare Ground Wire |
| |
Ground Screw | Metal Junction | |
| ||
Pigtail (not | Box | |
supplied) |
| |
Fixture Bare | White to White | |
Black to Black | ||
Ground Wire |
Recommended Grounding Method
Black to Black
White to White
Ground to Ground
One Motion Sensing Light
Black to Black
White to White
Ground to
Ground
Two Motion Sensing Lights (Working Independently)
Other Wiring Options
This fixture can be wired to control another standard or motion sensing light fixture(s). See the following wiring diagrams for proper connections.
Note: All wiring should be run in accordance with the National Electrical Code through conduit or another acceptable means. Contact a qualified electrician if there is any question as to the suitability of the system.
When controlling an additional light fixture(s), the maximum wattage of the motion sensor on this fixture should be observed. See illustration below for an example of a maximum lamp wattage load calculation.
Maximum Lamp Wattage Rating for Light Fixture – 100 Watts
Maximum Load for CONTROLLING Fixture Motion Sensor –
500 Watts
Maximum Lamp Wattage Rating for Light Fixture – 100 Watts
CONTROLLED Fixture 1
Maximum Lamp
Wattage Rating
for Light Fixture –
100 Watts
CONTROLLED Fixture 2
TOTAL Load for Motion Sensor –
300 Watts (200 Watts Remaining)
IMPORTANT: When determining the maximum lamp wattage rating of the fixture to be controlled, refer to the maximum lamp wattage label on the fixture and not the wattage rating on the lamp(s) currently installed in the fixture.
White to White | Black to Black |
Ground to
Ground
Red to Black
Motion Sensing | Standard Light |
Light | Fixture |
Wiring Motion Sensing Light to Control Standard
Fixture
