TEST AND ADJUSTMENT
❒Turn on the circuit breaker and light switch.
NOTE: Sensor has a 1 1/2 minute calibration period before it will detect motion. When first turned on, wait 1 1/2 minutes.
❒For aiming, turn the SENSITIVITY (SENS) control to the mid position and the
The detector is less sensitive to motion directly towards it and more sensitive to across motion.
MotionMotion
Sensor
Least Sensitive | Most Sensitive |
TEST 1 5 10 MIN MAX | SENS |
Bottom of Sensor
In the test position shown above, the light will turn on for 5 seconds each time motion is detected dur- ing both daylight and darkness.
Avoid aiming the control at:
• | Objects that change temperature rapidly, such as heat- |
| ing vents or air conditioners. These heat sources |
| could cause false triggering. |
• | Areas where pets or traffic may trigger the control. |
❒Rotate the sensor base left and right to aim the sensor. Adjust the sensor eye up and down to obtain desired coverage range.
❒Walk through the coverage area noting where you are when the lights turn on.Move the sensor head up, down, or sideways to change the coverage area.
❒SetSENSITIVITYasneeded. Too much sensitivity may increase false triggering.
❒Set the amount of TIME the lightsstayonaftermotionisde- tected (1, 5, or 10 minutes).
Aim Sensor
Down for Short
Coverage
Aim Sensor
Higher for Long
Coverage
• Nearby large, |
may trigger the |
lights at the sensor. |
110°
7ft
(2.1 m)
30 ft (9.1m) |
|
Maximum Range | Maximum |
| Coverage Angle |
SPECIFICATIONS
Range . . . . . . . . Up to 30 ft (9.1 m) [varies with surrounding temperature].
Sensing Angle. . . . . Up to 110°
Electrical Load. . . . . Up to 60 Watt Maximum In- candescent
Power Requirements. . 120 VAC, 60 Hz
Operating Modes. . . . TEST, AUTO and MANUAL OVERRIDE
Time Delay . . . . . . 1, 5, 10 minutes Sensitivity . . . . . . Adjustable
HeathCo LLC reserves the right to discontinue prod- ucts and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.
