Model SL-6164
Your doorbell includes:
¥Doorbell chime
¥Doorbell button/transmitter w/battery
¥Hardware pack
You'll need to buy 3 "D" alkaline batteries for alkaline batteries will last up to three years.
Wireless
Musical
Chime
the chime. In typical use,
1.To open the chime case: Press in both catches on the bottom of the chime and lift the case open.
Chime Volume |
Battery | Battery | Battery |
2.Install the 3 alkaline "D" b a t t e r i e s . Make sure the batteries are oriented properly.
3.Before mounting, test the doorbell range. Put the
chime where you want to mount it and temporarily place the doorbell button on the doorjamb. Press the doorbell button.
Operation
Press the doorbell button to verify that the doorbell and chime work prop- erly. If the chime does not sound see the Troubleshooting guide on page 5.
4.Mount the doorbell button and chime.
Use either screws or double sided tape to mount the doorbell button.
To mount with screws, remove the back of the case by lightly pushing in the tab on the bottom with a small screwdriver and rotating the blade.
Attach the back of the case to the door jamb or wall. Snap the front of the button back on.
When attaching the doorbell but- ton using the double sided tape, make sure the surface of the door jamb or wall is clean.
© 2003 DESA Specialty Productsª |
