Heath Zenith SL-7001 manual Solar Powered Motion Sensor Light, Operation, Installation, Features

Solar Powered Motion Sensor Light

Model SL-7001

Features

•Turns on light when motion is detected.

•Automatically turns light off.

•Photocell keeps the light off during daylight hours.

•Battery Protection Circuitry. Protects against ex- cessive overcharge and undercharge.

This package includes:

Light

Battery

Case

Solar Panel

Sensor

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec.	x	x
Auto	30 Sec.		x

Note: When first turned on wait about 1 minute for the circuitry to calibrate.

TEST

Put the sensor switch in the TEST		TEST
	OFF		AUTO
position.
AUTO
Put the sensor switch in the AUTO		TEST
	OFF		AUTO
position.

INSTALLATION

For best performance, mount the fixture about 8 feet (2.4 m) above the ground.

	Light	5 Mounting	Three Mounting Holes for Solar Panel Base
		Screws (2 sizes)
			❒ Mount Solar Panel Base on a solid surface using
	Requirements
			three tapered screws. Adjust the panel to point
•	Do not turn the light on before the battery is fully		directly at the noon sun. Avoid obstructions such as
	charged. Charge the battery by keeping the switch in		trees or buildings that may block sun light. Allow for
	the OFF position and the solar collector pointed		enough wire to reach the case. Keep ball joint at
	directly at the noon sun for 3 sunny days. If not fully		bottom.
	charged, the unit will not work.		Note: You will want to re-aim the solar panel as
•	When FULLY charged, the solar light will operate a		the seasons change to keep it pointed directly at
	maximum of 15 days without sunlight. Actual operat-		the noon sun.
	ing time will vary depending upon how frequently the
	light is triggered.
				3 3/4"

❒ Mount the Battery Case on a solid surface using two round-head screws and the keyholes on the back of the case.

© 2003 DESA Specialty Products™ 595-5291-04