SECTION 4. TROUBLESHOOTING
4-1. TROUBLESHOOTING GUIDE
PROBLEM | CAUSE | |
Product not holding | z Doors are not kept closed | |
| z Product held too long | |
| z Temperature too low | |
| z Radiant heat too low | |
| z Light bulbs out |
|
Doors are fogging | z Doors left open too much allowing | |
| doors to cool and cause condensation | |
| z Radiant heat not high enough | |
| z Temperature too high | |
Lights will not turn | z Defective fuse |
|
on |
|
|
Not all lights on | z Faulty light bulbs |
|
|
|
|
|
|
|
|
|
|
|
|
|
CORRECTION
zKeep doors closed when holding possible
zOnly hold product for recommended times
zTurn to higher setting
zTurn to higher setting
zReplace as required, per light Bulbs and Glass Panels section
zKeep doors closed when possible
zTurn to higher setting
zSee recommended settings and temperature
zReplace 15 amp fuse
zReplace with recommended bulb, per Light Bulbs and Glass Panels section
More detailed troubleshooting information is available in the Technical Manual, available at
www.hennypenny.com, or
12
