Henny Penny HMI-103, HMI-105 manual Troubleshooting Guide, Problem, Cause, Correction

Models: HMI-103 HMI-105

1 19

Page 15

Model HMI-103/105

PROBLEM	CAUSE	CORRECTION
Product not holding	• Product held too long	• Only hold product for recommended times
temperature
	• Radiant heat too low	• Turn to a higher setting
	• Air heat too low	• Turn to a higher setting

Lights will not	• Defective fuse	• Check fuse and replace if necessary
turn on

Not all lights turn on	• Faulty light bulb	• Replace with recommended bulb

More detailed troubleshooting information is available in the Technical Manual, available at www.hennypenny.com,

or 1-800-417-8405 or 1-937-456-8405.

203

4-1

Image 15

Contents

OPERATOR’S MANUAL Henny Penny Island Warmer Model HMI-103Model HMI-105 Page LIMITED WARRANTYFOR HENNY PENNY EQUIPMENT Model HMI-103/105FM05-018-C Revised Section PageTABLE OF CONTENTS 1-3.PROPER CARE 1-2.FEATURESSECTION 1. INTRODUCTION 1-1.ISLAND WARMERSinjury 1-5.SAFETYscrews as component damage or electrical shock SECTION 2. INSTALLATION2-1.INTRODUCTION Penny Island Warmer2-4.ELECTRICALDATATABLE SECTION 3. OPERATION 3-1.INTRODUCTION3-2. START-UP Model HMI-103/105 DESCRIPTION 3-5.OPERATING CONTROLSFIG. NO ITEM NO3-5.OPERATING CONTROLS Continued Model HMI-103/1052 1 Figure 3 Figure 4 6 5 Figure Model HMI-103/105 3-5.OPERATING CONTROLS ContinuedPage CAUSE SECTION 4. TROUBLESHOOTING4-1.TROUBLESHOOTING GUIDE PROBLEMPage Model HMI-103/105 G L O S S A R YModel HMI-103/105