Model
| SECTION 2. INSTALLATION |
| This section provides the installation instructions for the Henny |
| Penny Island Warmer. |
Installation of this unit should be performed only by a qualified service technician.
|
| Do not puncture the skin of the unit with drills or |
|
| screws as component damage or electrical shock |
|
| could result. |
| The Henny Penny Island Warmer is tested, inspected and | |
| expertly packed to insure arrival at its destination in the best | |
| possible condition. The unit has been bolted to a wooden skid. | |
| All items have been packed and taped inside of the unit. The | |
| warmer is then packed inside a triple wall corrugated carton | |
| with sufficient padding to withstand normal shipping treatment. | |
| Any shipping damages should be noted in presence of | |
| delivery agent and signed prior to his or her departure. | |
| To remove the unit from the carton, you should: | |
| 1. | Carefully cut banding straps. |
| 2. | Open flaps of carton and remove packing. |
| 3. | Lift carton from unit. |
| 4. | Remove four bolts mounting the warmer to the skid. |
| 5. | If installing the unit to a base, use the bolts provided to |
|
| mount the unit to the base. |
| 6. | Unpack doors and pan supports and install. |
| 7. | The unit is now ready for location and |
203 |
