Henny Penny HMI-105, HMI-103 manual Electricaldatatable

Model HMI-103/105

2-3. ELECTRICAL CONNECTION The island warmer is available from the factory wired for 120/208-240 volts (domestic), or 230 volt and 400 volt (international), single or three phase, 3 or 4 wire plus ground (includes neutral). The proper power service cable is provided with domestic units, but not on international units.

This unit must be adequately and safely grounded. Refer to local electrical codes for correct grounding procedures. If unit is not adequately grounded, electrical shock could result.

A separate disconnect switch with proper capacity fuses or breakers must be installed at a convenient location between the unit and the power source.

2-4. ELECTRICALDATATABLE	Model	Volts	Phase	Watts	Amps	Wires
	HMI-103 120/208 1			2400	11.0	3+G
	HMI-103 120/208 3			2400	8.0	4+G
	HMI-103 120/240 1			2600	11.0	3+G
	HMI-103 120/240 3			2600	7.5	4+G
	HMI-105 120/208 1			3900	18.0	3+G
	HMI-105 120/208 3			3900	13.0	4+G
	HMI-105	120/240 1		4200	17.5	3+G
	HMI-105	120/240	3	4200	12.0	4+G
	HMI-103	230	1	2600	11.3	4+G
	HMI-105	400	3	4200	7.8	4+G

2-2 203