Henny Penny OE/OG 301/302/303 manual NG LE With switch in Open Circuit POWER position

NG

LE

With switch in Open Circuit POWER position

and switch light not illuminated, fryer is complete ly inoperative.

Check to see if unit is plugged in.

Check breaker or fuse at supply box.

Check control panel fuse per Section 6-12.

@Check POWER switch per Section 6-14. Replace if defective.

.Check voltage at wall receptacle. Check cord and plug.

With switch in			No power to		Check fuse on PC board.
power	position,		board
switch	light is
on, but all		other
lights	are	out ex
cept the pump
will operate.
Shortening		will	Faulty	Contactor
not heat but			(elec. model)
lights	are	on.
			Faulty	Gas Valve	Check gas valve per Section 6-11.
			(gas model)
			Faulty	Gas	Check gas solenoid, per Section 6-19.
			Solenoid (gas
			model)
			Faulty	Probe	Check probe per		Section 6-4. “Error message”	E6.
			Faulty	High	Check High	Limit	per Section 6-6, or 6-7. “Error	message”
			Limit		ElO.
			Faulty	Drain	Check drain	switch per Section 6-13. “Error message” E15.
			Switch