HIGH TEMPERATURE LIMIT CONTROL Continued | Henny Penny OFE-321

2-12. HIGH TEMPERATURE

Model OFE-321,322

2-12. HIGH TEMPERATURE

LIMIT CONTROL (Continued)

Be sure capillary bulb of high limit is located behind capillary bulb of thermostat. Both capillary bulbs

and bulb holders should be positioned as not to interfere with basket or when cleaning the frypot wall, or damage to capillary tube could result.

13.With excess capillary line pulled out, tighten smaller nut hand tight, then ¼ turn with wrench.

14.Replace front panel.

15.Refill with shortening.

405

2-12

Image 12

Henny Penny OFE-321 manual HIGH TEMPERATURE LIMIT CONTROL Continued, Replace front panel 15.Refill with shortening

Contents

2-3.COMPLETE CONTROL SECTION 2. MAINTENANCE 2.Remove control panel 2-6.I/O POWER SUPPLY 2-7.DRAIN MICROSWITCH Continued 2-8.FILTER SWITCH Replacement 2-9.HEATING ELEMENTSCheckout Voltage Temperature Spreader Probe 14. Replace the shortening in the frypot Checkout Power Removed 2-10.HEATING CONTACTORS 3031 33Mercury Contactor Checkout Power Supplied 2-10.HEATINGCONTACTORS Continued 2-11.SPEAKER ASSEMBLY 2-12.HIGH TEMPERATURE Replacement 2-12.HIGH TEMPERATURE LIMIT CONTROL Continued 14.Replace front panel 15.Refill with shortening 2-13 2-14