Linking the Fixtures

DL.1 fixtures can be linked to other fixtures on a standard DMX 512 link and then be controlled by a DMX controller.

The number of fixtures on a link will be determined by the combined number of channels required by all the fixtures. The DL.1 fixture requires 11 channels on a DMX 512 link.

Note: When connecting more than 32 fixtures to a link, use a DMX splitter. The 32 device limit complies with the EIA-485 standard. Connecting more than 32 devices per link without a DMX splitter will eventually deteriorate the digital signal.

Controllers, serial data distributors, data line optoisolators, and any fixtures using the RS-422 DMX standard of serial communications (including Dataflash® AF1000 xenon strobes, and Intellabeam® fixtures) block software uploads, crossloads, or TalkBack™ protocol on a link. Therefore, make sure to either put all of these devices after the DL.1 fixture on the link, or bypass these devices when performing software uploads or crossloads.

Data Cabling and Connectors

To link one or more fixtures to a controller and/or to each other, obtain data cabling. Cabling can be purchased from High End Systems or constructed.

High End Systems recommends data-grade cable. Data-grade cable is designed to carry a high-quality signal with less susceptibility to electromagnetic interference.

DMX Data Cables

Use Belden® 9842 or equivalent (meets specifications for EIA RS-485 applications) data cables with the following characteristics:

•Two twisted pairs (4-conductors) plus a shield

•Maximum capacitance between conductors: <15 pF/ft.

•Maximum capacitance between conductor and shield: 55 pF/ft.

•Maximum resistance: 20 /1000 ft.

•Nominal impedance: 120

Cable Connectors

The DL.1 fixture accepts 5-pin XLR cable connectors. Cabling must have a male XLR connector on one end of the cable and a female XLR connector on the other end.

Pin one is the common (cable shield), pin two is the data complement (negative), pin three is the data true (positive). Pins four and five are not used, but they allow a secondary data link to pass through the fixture, (see Figure 2-5). Test each cable

2

DL.1 User Manual

Setup and Configuration 2-7

Page 26 Page 28
Page 27
Image 27
High End Systems DL1 user manual Linking the Fixtures, Data Cabling and Connectors, DMX Data Cables, Cable Connectors
Page 26 Page 28

DL1 specifications

The High End Systems DL1 is a cutting-edge digital light fixture designed for dynamic and engaging lighting applications in the entertainment industry. Known for its versatility, high performance, and user-friendly interface, the DL1 has become a staple in various venues, including theaters, concert halls, and corporate events.

One of the standout features of the DL1 is its advanced digital projection technology. This fixture combines powerful imaging capabilities with high-quality optical components, allowing users to project vibrant images, videos, and animations onto various surfaces. The DL1 boasts a high-resolution output and color fidelity, ensuring that visuals are displayed with stunning clarity and richness. This makes it an excellent choice for productions requiring intricate image presentations.

In terms of flexibility, the DL1 offers an impressive range of features tailored for live events. It comes equipped with a highly configurable lens system that allows users to alter the beam angle, focusing on the fine details or casting a wider light for broader coverage. This adaptability is coupled with a robust gobo system, enabling designers to create dynamic patterns and shapes that can enhance any performance setting.

The DL1 integrates seamlessly into existing lighting rigs, thanks to its compatibility with industry-standard control protocols, such as DMX and Art-Net. This allows for precise control and integration with other lighting fixtures, providing designers and operators with extensive creative possibilities. Its on-board programming features also empower designers to set up shows quickly and efficiently, reducing time spent on setup and increasing the focus on artistic direction.

In terms of construction and durability, the DL1 is built to withstand the rigors of tour and rental environments. Its rugged yet lightweight design ensures reliability, while the efficient cooling system prolongs the lifespan of its internal components. This durability is essential for maintaining peak performance during demanding shows and events.

Lastly, the High End Systems DL1 emphasizes ease of use. With an intuitive user interface and robust onboard capabilities, operators can quickly navigate settings and access features, making it ideal for both novice and experienced lighting designers. The combination of its innovative technology, flexible features, and ease of use firmly establishes the DL1 as an essential tool for any modern lighting designer looking to enhance their productions with high-impact visuals.
Top Page Image Contents