Hilti WSC 70-A36, WSC 55-A24 operating instructions Accessories, Technical data

en

2.9 Additional items required for operating the tool

For the WSC 70ತA36: a B36/2.4 NiCd battery and a C7/36ತACS charger or a B36/3.3 Li-ion battery and a C4/36LiತACS charger.

For the WSC 55ತA24: a B24/2.0 NiCd battery and a C7/24 or C7/36ತACS charger.

NOTE

Depending on the version, these items may be supplied with the power tool.

3. Accessories

Accessories for the WSC 70ತA36

Charger	C7/36-ACS
Charger	C4/36-ACS
Battery	B36/2.4 NiCd
Battery	B36/3.3 Li-ion
Parallel guide (rip fence)	WPG 70/55
Guide rail	WGS 1400ತ2B
Accessories for the WSC 55ತA24
Charger	C7/24
Charger	C7/36-ACS
Battery	B24/2.0 NiCd
Parallel guide (rip fence)	WPG 70/55
Guide rail	WGS 1400ತ2B

4. Technical data

Power tool	WSC 70ತA36	WSC 55ತA24
Rated voltage (DC voltage)	36 V	24 V
Weight in accordance with EPTA	0 kg	0 kg
procedure 01/2003
Dimensions (L x W x H)	307 mm x 393 mm x 233 mm	296 mm x 381 mm x 233 mm
Base plate	193 mm x 320 mm	193 mm x 320 mm
Maximum saw blade diameter	190 mm	160 mm
Minimum saw blade diameter	176 mm	149 mm
Saw blade disc thickness	0.5 to 1.5 mm	0.5 to 1.5 mm
Kerf width	1.6 to 2 mm	1.5 to 2 mm
Saw blade arbor size	30 mm	20 mm
Cutting depth	Cutting angle 90°: 70 mm	Cutting angle 90°: 55 mm
	Cutting angle 50°: 45 mm	Cutting angle 50°: 36 mm
	Cutting angle 45°: 51 mm	Cutting angle 45°: 40 mm
Riving knife thickness	1.5 mm	1.4 mm
Speed under no load	3,900 r.p.m.	3,300 r.p.m.

20