Using the TV features
Select channels by [CH+/CH-]
You can also use[CH+ /
number decrease.
Select channels by numbers
To select a channel : Press the channel numbers in series to select channel directly.
For example, to seclect channel 120, Press the button 1, and 1 will display on the top right corner of the screen, then press the button 2, 12 will display, press the button zero, you can enjoy the program of channel 120.
NOTE:
1)When you changing the channel, the sound state graphics can be displayed below the channel number. There are 3 sound states in this TV. If the sound is mono, the graphics is 
, If the sound is stereo, the graphics is
If the sound is NICAM dual I/II, the graphics is 
. There are two symbol at right of thesound state graphics, Which indicate preset of picture system and sound system.
2)When you changing the channel, the sound of current channel will be firstly changed to stereo or NICAM dual I according to the sound state of current channel. You can press the I/II button on the remote control to change current sound type.
Adjust Volume
When menu is not displayed on the screen, press [VOL+ or
Use [Recall] button
Press the [ Recall ] button repeatedly to alternate between the present channel and the previous channel.
Display channel number
Press [Display] button to display the present channel number, but it will also disappear 3 seconds after your pressing.
Select picture modes
You can select the picture mode from among three preset modes and one
Select sound modes
Normal
User
Soft
Bright
You can select the sound mode from among three preset modes and one
Speech
Nomal
Use [Still] button
Press the [ Still ] button to snapshot the present picture, and press again to return to normal watching.
Use [ Zoom ] button
Press the [ Zoom ] button to adjust the screen aspect ratio and zoom ratio
Mute function
Press [ Mute ] button repeatedly to switch between mute and unmute mode.
User
Music
- 10-
