Hisense Group TC14FS68 owner manual Changing channels

Using the TV features

Note:

1)When the search is finished, the screen will display as left shown below and the TV will automatically turn to the first channel that has a program. Otherwise the screen will display as right shown below.

2)The PRESET menu will not appear when the TV is in AV status.

3)Press the VOL+ or VOL- to stop the auto-search if you want.

Search finished

Please watch

Nothing searched

Check antenna

Press VOL+ and VOL- or the channel number buttons to select the channel that you wish.

The item allows you to add or delete a channel. If some channel is set to Delete, the channel will be skipped when you select a channel by pressing CH+ and CH-.

Press VOL+ or VOL- to select Add or Delete.

The item allows you to select the signal receiving method.

Press VOL+ or VOL- to change the item between Air and Cable.

Changing channels

To change the channel, you can

1.Press CH +or CH- on the remote control or CH on the TV. 2.Press the channel number buttons(0-9).

1)To select a one-digit channel : Press the 0 button to display 0- and then press a button from 1-9.

2)To select a two-digit channel : Press a button from 1-9 to select the first number, then press a button from 0-9 again to select the second number. For example, to select channel 28, press the 2 button first , 2- will appear on the screen, and then press the 8 button.

3)To select a three-digit channel: Press the 1 button for about one second until 1-- appears on the screen, then press buttons from 0-9 successively to select the other two numbers. For example, to select channel 120, press the button 1 for one second , 1-- will appear on the screen, then press the button 2 and the button 0 successively.

-11-