Hitachi 2730P manual Removal and replacement procedures

Removal and replacement procedures

2.Turn the computer display-side up, with the front toward you.

3.Open the computer as far as possible.

4.Lift the rear edge of the keyboard 1 and slide it 2 back until the pointing stick cable is accessible.

5.Release the zero insertion force (ZIF) connector 3 to which the pointing stick cable is attached, and disconnect the pointing stick cable 4 from the system board.

6.Swing the top edge of the keyboard 1 up and forward until it rests upside down on the palm rest.

7.Release the ZIF connector 2 to which the keyboard cable is attached, and disconnect the keyboard cable 3 from the system board.

8. Remove the keyboard.

Reverse this procedure to install the keyboard.

Maintenance and Service Guide 4–19