0348E3.fm Page 14 Tuesday, April 25, 2000 4:15 PM
Special Buttons
PIP (Picture in Picture) Button
This feature allows the viewer to monitor one channel program while watching another. The monitored source (PIP) can be a different channel or a different video source (such as a VCR) when connected to the input jacks.
PIP Operation
1.Press the PIP button (set must be ON). The PIP frame will appear at the position it was last displayed. The main picture video source and PIP video source will display on screen momentarily. Audio will be that of main picture.
PIP
Main Picture with Audio
CH 2
PIP VIDEO 1
PIP
Frame
Note: When the Main Picture is in Video mode with no signal, the PIP will not operate properly.
2. Press the PIP button again to size PIP frame or twice to cancel PICTURE IN PICTURE feature.
PIP
Large PIP Frame | Small PIP Frame |
PIP CH Buttons
Press the PIP CHANNEL π θ button while the PIP frame is displayed to sequentially scan through channels.
PIP CH qPIP CH p
Scan Channel Down | Scan Channel Up |
(next lower) | (next higher) |
- 14 -
