Hitachi 309521J User Interface, Fluid Manifold, Install Sampling Valves, Cover - back view

User Interface

FIG. 4 and FIG. 5

1.Connect display board (410) communication cable (416) to J1 on main circuit board (301).

2.Connect data cable (406 - 7-pin connector) to J2.

WARNING

The user interface must be grounded. Read warnings, page 5.

3.Connect ground wire (315) to ground stud on back of cover with nut (311).

4.Secure cover (4) to mounting plate (10) with lock- washers (911) and nuts (910). FIG. 1.

410 4

311

416 406

FIG. 4: Cover - back view

Assemble

10 9 8 7 6 5 4 3

301

3

J2 J1

315 3 4 5 6 7 8 9 10

- +

FIG. 5 Control Box

Fluid Manifold

CAUTION

Do not assemble static mixer directly to fluid manifold. Install static mixer after first 50 ft. (15 m) of hose to ensure material is completely mixed. Spraying unmixed material could necessitate rework of part sprayed. See Setup in Xtreme Mix Operation manual.

Install Sampling Valves 244683

Install sampling valves (918) into the metering valves (601). Install barb fitting (919) and tubing (920) into each sampling valve. FIG. 7.

12 309521J