REAR PANEL JACKS

FIRST TIME USE

RGB - Analog Input

Use this 15-pin D-Sub input for your external devices with RGB output (see page 22).

RGB - Audio Input

Connect audio for RGB input (if you have mono sound, insert the audio cable into the left audio jack).

DVI - HDTV - Digital Input

Use this DVI Digital input for your external devices with digital output capability, such as a Set-Top-Box, high band DTV decoders and DVD players with digital content protection (see page 22). DVI is INPUT 1 and has priority over component input. When DVI is used, hook up audio to INPUT 1.

NOTE: When using a Set-Top-Box, it is recommended to use a 1080i or 720p input signal.

To Monitor

Connect the Monitor Connection Cable to the AVC center’s “TO MONITOR” connector, and to the display monitor’s “FROM AVC” connector.

IR Blaster

This jack provides IR output to your external components (VCR, Cable box, DVD player, etc.). With this connection, your external components can automatically be controlled by the A/V network feature. This connection will allow you to control the external components with your Plasma Television’s remote control in TV mode.

Subwoofer Out

Connect this SUB WOOFER OUT output to the external audio component input using the sub woofer cable provided.

Ferrite Core

Sub-woofer cable (RCA Type)

To AVC

Connect the Monitor Connection cable from the AVC center’s “TO MONITOR” to these connectors (“FROM AVC”).

SUB-POWER button

This power is for serviceman usage.

12

Page 12
Image 12
Hitachi 42HDT55 RGB Analog Input, RGB Audio Input, DVI Hdtv Digital Input, To Monitor, IR Blaster, Subwoofer Out, To AVC