RGB ON SCREEN DISPLAY
RGB INPUT
RGB ASPECT DISPLAY MODE. | RGB (Analog) INPUT SIGNAL |
|
|
|
|
| ||
| Others | SVGA/XGA(4) | VGA | 480p |
| 720p |
| 1080i |
|
|
| ||||||
ASPECT | X | REAL | REAL | REAL(1) |
| X |
| X |
MODE | NORMAL | NORMAL | NORMAL NORMAL(1) |
| X |
| X | |
AVAILABILITY | FULL | FULL | FULL | FULL(1) |
| FULL(2,3) |
| FULL(2,3) |
|
|
|
|
|
|
|
|
|
For numbers in ( ), please see corresponding note below.
NOTES: 1. Lack of raster can be seen in RGB when a 480p signal is input.
2.AUTO ADJUST function (see page 74) is not available in 720p, 1080i, and 480p input signal.
3.FULL aspect mode, only 95% of information can be displayed (5% is treated as overscan).
4.50” only.
THE
INPUT LEVEL
Select the Input Level voltage between 0.7V and 1.0V.
USING
Setup |
|
|
Auto Adjust | Adjust | |
Horizontal Position | 0 | |
Vertical Position | 0 | |
Horizontal Clock | 0 | |
Clock Phase | 0 | |
Reset |
| Reset |
Input Level | 0.7V | |
Black Side Panel | Off | |
Move | SEL Select |
|
Use THUMB STICK , to select between 0.7V and 1.0V depending on the amount of brightness in the picture.
BLACK SIDE
PANEL
The BLACK SIDE PANEL function turns the gray side bars ON/OFF when watching Aspect in Real and Normal signals in Standard Mode.
Setup |
|
|
Auto Adjust | Adjust | |
Horizontal Position | 0 | |
Vertical Position | 0 | |
Horizontal Clock | 0 | |
Clock Phase | 0 | |
Reset |
| Reset |
Input Level | 0.7V | |
Black Side Panel | Off | |
Move | SEL Select |
|
Press down on THUMB STICK to select BLACK SIDE PANEL ON/OFF.
NOTE: To prevent the plasma phosphor from burning when watching Aspect in Real and Normal signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3 signal with gray side bar.
POWER SWIVEL
Controls the motorized stand for 32”/42” displays.
Power Swivel |
|
|
Move | SEL | Return |
Use THUMB STICK | to rotate the TV to the right. |
Use THUMB STICK | to rotate the TV to the left. |
Release the THUMBSTICK to stop rotation.
NOTES: 1. The Power Swivel has a maximum turning radius of 30˚ (left and right).
2.Do not place any objects on the path of the monitor when using the power swivel feature.
3.Before using the power swivel feature, please make sure that the path of the monitor is clear of any fingers, hands or any other body parts to avoid causing injury.
76
