![](/images/new-backgrounds/1204934/20493427x1.webp)
CONNECTING EXTERNAL VIDEO SOURCES
FIRST TIME USE
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your Plasma TV is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.
Before Operating External Video Source
The input mode is changed when the VID1~VID5 button is pressed as shown below. Connect an external source to the INPUT terminal, then press the VID1~VID5 button as necessary to view the input source (see page 31).
INPUT MODE SELECTION ORDER
| (ANTENNA) |
| (INPUT) |
| 3:32 PM | 3:32 PM | |
| YPBPR:1 | ||
| Ant A 32 | ||
| VID1 | ||
|
| VID1 | |
|
| Stereo | |
| Stereo | 1080i Format | |
|
|
|
ANT
CONNECTING A MONAURAL AUDIO SOURCE TO INPUT2~INPUT5
1.Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the AVC Center below.
2.Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack.
3.Press the VID2~VID5 button to view the program from the VCR or the laserdisc player. The VIDEO mode disappears automatically after approximately four seconds.
4.Press the ANT button to return to the previous channel.
Rear Panel of AVC Center
|
|
| ANT B |
| TO CONVERTER |
| ANT A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ANALOG INPUT | Please use HITACHI specified cable. | |
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
| Y/VIDEO |
| Y |
|
|
|
| TO MONITOR |
|
|
|
|
|
|
|
|
|
|
| ||
VIDEO | VIDEO | VIDEO |
|
|
|
|
|
| L | L/(MONO) |
|
|
L |
|
|
| PB |
| PB |
|
| AUDIO |
|
|
|
L/(MONO) | L/(MONO) |
| L/(MONO) | L/(MONO) |
| AUDIO |
|
| ||||
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
| |
R | R | R |
| PR | R | PR | R |
| R | R | AC IN |
|
AUDIO | AUDIO | AUDIO |
|
| AUDIO |
| AUDIO |
|
| |||
MONITOR OUT | INPUT 4 | INPUT 3 | IR BLASTER |
| INPUT 2 |
| INPUT 1 | INPUT 1 | AUDIO OUT | RGB | TruBass SRS and | symbol are trademarks of SRS Labs, Inc. |
Back of VCR
AUDIO OUT VIDEO OUT
VCR
14