![](/images/new-backgrounds/1204934/20493447x1.webp)
REMOTE
REMOTE CONTROL
In addition to controlling all the functions on your HITACHI Plasma TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV) converters,
To operate your Plasma TV, point the remote control at the remote sensor of the AVC box/Display Monitor and press the TV but- ton. The TV button will blink, indicating that the remote will now control your television.
To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The VCR button will blink, indicating that the remote will now control your VCR (see page 35 for instructions on how to program the remote to control your VCR).
To operate your cable box, point the remote at the remote sensor of the cable box and press the CABLE (CBL) button. The CBL button will blink, indicating that the remote will now control your cable box (see page 36 for instructions on how to program the remote to control your cable box).
To operate your
To operate your DVD player, point the remote at the remote sensor of the DVD player and press the DVD button. The DVD but- ton will blink, indicating that the remote will now control your DVD player (see page 38 for instructions on how to program the remote to control your DVD player).
To operate additional audio equipment, point the remote at the remote sensor of the component you wish to control and press the CD, PVR or AMP button. This button will blink, indicating that the remote will now control the desired component (see page 39 for instructions on how to program the remote to control additional Audio equipment).
THE
POWER
TV | VCR |
|
| CBL | STB |
|
|
|
| ||
| SOURCE WIZARD |
| |||
DVD | CD |
| PVR | AMP | |
|
|
|
| ||
| 1 |
| 2 | 3 |
|
| 4 |
| 5 | 6 |
|
| 7 |
| 8 | 9 |
|
SLEEP |
|
| 0 |
| INFO |
ANT | TV/RGB | A/V NET | ASPECT | VIDEO | |
|
|
|
| ||
| MENU | EXIT |
|
These buttons allow the remote to control your TV, VCR, cable box, satellite receiver, DVD player, or other Audio equipment depending on which mode is chosen, as explained above.
,LIGHT BUTTON
When you are in a dark room, press the light button on the remote to light up the buttons shown in and the source button will blink. The light will stay on for about 8 seconds if the light button is not pressed again. These buttons will not appear to illuminate if the room is too bright.
SELECT
VOLCH
MUTE
LAST | CH |
VID1
VID 2
PIP
VID 3
SURF
| 5 |
| VID |
VID | 4 |
| |
| FREEZE |
| PIP ACCESS | |
PIP MODE | SWAP | DAY/NIGHT |
|
REC
24