6.0Remote Control
V Tune Pro | POWER | ||
1 | |||
F1 | F2 | F3 | MUTE |
2 | 3 | 4 | 5 |
CC | EDS | AUDIO |
|
8 | 9 | 10 |
|
TV |
| FM | VOL |
| 6 | ||
|
|
| |
11 | 13 | 12 |
|
|
| ||
15 | SELECT | 16 |
|
| 17 |
|
|
MENU |
| INFO | CH |
|
|
| 7 |
18 14 19
120 221 322
423 524 625
726 827 928
SETLAST
30029 31
P1 P2 P3
32 33 34
P4 P5 P6
35 36 37
P7 P8 P9
38 39 40
P10 P11 P12
41 42 43
Presets
Using the Aurora IRC-7 Remote Control
1.POWER - Turns on and off the VTune
2.F1 - See Setup Mode section for detail
3.F2 - See Setup Mode section for detail
4.F3 - See Setup Mode section for detail
5.MUTE - Toggles the volume mute on/off
6.VOLUME - Ramps the volume up or down
7.CHANNEL - Changes the TV channel + or -
8.CC - Closed Captioning 1 & 2
9.EDS - Extended Data Service
10.AUDIO - Not Used (Future use)
Source Selection
11.TV INPUT - Selects the TV Antenna as the Main source
12.FM INPUT - Selects the FM Antenna as the Main source
13.UP ARROW - Not Used (Future use)
14.DOWN ARROW - Not Used (Future use)
15.LEFT ARROW - FM Scan -
16.RIGHT ARROW - FM Scan +
17.SELECT - Confirms selection. Entering Channel 12 then Select will immediately change the channel as compared to waiting for the 3 second time out.
18.MENU - Not Used (Future use)
19.INFO - Displays current channel and volume level
20 - 29 Number Keys - Used for direct channel selection
30.SET - Pressing this and one of the Preset buttons within 1.5 seconds stores current channel.
31.LAST - Returns to the last channel selected
Preset Selections
32 - 43 Preset Keys - P1 thru P12 selects the stored preset for TV or FM.
