Hitachi 32PD5000, 42PD5000 Parts Configuration Chart, PWT001, Installation Instructions, Model

Hitachi Plasma TV Horizontal Wall-mount Unit

Model
PWT001	Installation Instructions

Thank you for purchasing the Hitachi Plasma TV Wall-mount Unit.

To ensure correct usage, please read this instruction manual thoroughly. After reading, please store this manual in a safe place for future reference.

This plasma TV wall-mount unit is for use with the following models:

HITACHI Plasma TV CL32-PD2100, CL37-PD2100, CL42-PD2100, 32PD5100, 42PD5100, 42PMA500

32PD5000, 32PD5200, 32PD5300, 37PD5200, 42PD5000, 42PD5200, 42PD5300, CMP4211/2, CMP4213/4

Special techniques are necessary for installation of the plasma TV.

■Do not attempt to perform this work by yourself.

■Request an installation specialist to install this unit.

■This company assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

■Please remember that if you remove the plasma TV set from the wall later, you will find the screw holes and anchor bolts for the mounting unit left on the wall. Also note that a long use of the plasma TV set may discolor the wall around it due to its heat and air flow.

To dealers and shops

●To ensure customer safety, be sure to design the installation location so that the strength is sufficient to withstand the weight of both the plasma TV and the wall-mount unit.

●Always use at least two persons for all installations.

●Fully tighten all of the mounting screws as specified in the installation instructions.

Parts Configuration Chart

	In the parts packing
Wall-mount metal
(top) x 1
TV-mount metal	M6 x 18 screw	M5 - 6 flat washer
	x 10	x 8
x 2
Wall-mount metal
(center) x 1
	Wire clamp
	x 2
	Parts for CL37-PD2100 only
Wall-mount metal	Bracket (R),(L)	M6 x 18 screw
(bottom) x 1	x 1 each	x 4