Hitachi 42PMA500, 42PD5000 Mounting the TV-mount metals on the plasma TV, inch, CL32-PD2100

42 inch

4.Fasten the wall-mount unit securely to the wall.

●Clamp to two or more of the long slotted holes in the upper and lower parts of each wall-mounting metal in a well-balanced manner.

cutout

Mount on a firm,

solid surface.

Wall-mount metal (top)

Wall-mount metal (bottom)

Use the washers provided as necessary.

5.Dressing the cables

●When passing the plasma TV power cord and signal cables behind the plasma TV, use wire clamps, etc., to prevent cable damage.

Wire clamps

Mounting the TV-mount metals on the plasma TV

1.Remove the stand.

①Place a protective sheet cover on the top of a table and place the plasma TV on the cover with the back side upward.

➁Remove the 4 EMI ground screws. (for CL32-PD2100 only.)

➂Remove the 4 or 5 (CL37-PD2100) screws fastening the stand and remove the stand in the direction indicated by the arrow mark.

2. Installing the TV-mount metals

CL32-PD2100

■Fasten the two TV-mount metals to the back of the plasma TV with 4 M6 x 18 screws.

Remove the 4 screws

Remove the screws

(CL37-PD2100) Stand

4 M6 x 18 screws

Remove the 4 EMI ground screws.(CL32-PD2100)

Plasma TV

Table

Protective sheet cover

TV-mount metal

The 3rd TV-mount metal hole

The 4th TV-mount metal hole

– 6 –