Hitachi 50UX57B 60UX57B manual Rear Panel Jacks

REAR PANEL JACKS

	REAR SPEAKER	ANT A
	8Ω ONLY
				COMPONENT
		S-VIDEO		Y	Cb	Cr
R	L	TO
		CONVERTER	VIDEO	VIDEO
		VIDEO
		(MONO)	(MONO)
		L	L	L	L	L
	SP. MATRIX	ANT B
	SURROUND
		R	R	R	R	R
		AUDIO	AUDIO	AUDIO
		INPUT 1	INPUT 2	MONITOR	WIRELESS	AUDIO
	EXT.			OUT	OUT	TO Hi-Fi

Antenna Input/Output

The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture.) The antenna output labeled “TO CONVERTER” allows the ANT A connection to pass directly to a different source such as a cable box, when ANT B is displayed as a main picture.

Audio/Video Inputs 1, 2

The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert the audio cable into the left channel jack.)

NOTE: You may use VIDEO, S-VIDEO, or COMPONENT: Y-CbCrinputs to connect to Input 2, but note that only one of these may be used at a time.

Monitor Out

These jacks provide fixed audio and video signals which are used for recording.

Wireless Out

These jacks provide variable audio output to a set of wireless speakers. They can also be used for another stereo system amplifier. With this connection, the audio can be controlled by the television’s main volume and also by an independent volume feature found in the THEATER-WIRELESS SOUND menu.

Audio to HI-FI

These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be controlled by the television’s main volume.

S-Video Inputs 1 and 2

Inputs 1 and 2 provide S-Video (Super Video) jacks for connecting equipment with S-Video output capability.

Component: Y-CbCrInput 2

Input 2 provides Y-CbCrjacks for connecting equipment with this capability, such as a DVD player.

NOTE: DO NOT connect standard VIDEO or S-VIDEO to Input 2 when using Y-CbCrinput.

When using the Y-CbCrinput jacks, connect your components audio output to the TV’s Input 2 Left and Right Audio input jacks.

Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV’s Cb input and the components R-Y output to the TV’s Cr input.

It may be nessary to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-CbCrinputs. (See pages 49 and 50)

To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-CbCrjacks.

When using the Y-CbCrjacks, Input 2 will be viewed as a blank PIP sub-picture. (See page 24.)

11