TIMERS
Set Event Timer
This function will automatically operate the TV viewing reservation of a program. If the clock is not set, you can not use this function and the screen below will appear. The message on the screen will disappear after 3 seconds, then the screen automatically goes to the clock setup mode (see page 67).
Please Set Clock First.
Timers
Set The Clock
Set Sleep Timer
Set Day/Night Timer
Set Event Timer
Set Timer Recording
Move SEL Select
Timers |
|
|
|
|
|
Set Event Timer |
| AM | 7:31 PM | ||
Event 1 | Jan 1, 2004 | ||||
| Ant A |
| |||
Event 2 | AM | Jan 1, 2004 | |||
| Ant A |
| |||
Event 3 | AM | Jan 1, 2004 | |||
| Ant A |
| |||
Event 4 | AM | Jan 1, 2004 | |||
| Ant A |
| |||
Move SEL On/Off | Return |
|
| ||
Timers |
|
| 7:31 PM |
Set Event Timer | |||
Event 1 | Jan 1, 2004 | ||
| Ant A |
| |
Event 2 | Jan 1, 2004 | ||
| Ant A |
| |
Event 3 | Jan 1, 2004 | ||
| Ant A |
| |
Event 4 | Jan 1, 2004 | ||
| Ant A |
| |
Move SEL Return |
|
| |
Use CURSOR PAD G, H to highlight Event 1, Event 2, Event 3, Event 4 and then press the SELECT button to select. Use CURSOR PAD E, G, H to highlight and select START TIME Hour/Minute.
Use CURSOR PAD E, G, H to highlight and select START TIME AM/PM.
Use CURSOR PAD E, G, H to highlight and select FINISH TIME Hour/Minute. Use CURSOR PAD E, G, H to highlight and select FINISH TIME AM/PM. Use CURSOR PAD E to highlight the MONTH.
Use CURSOR PAD G to select a MONTH or CURSOR PAD H to select Daily, Weekly - Sunday to Monday. Use CURSOR PAD F to return to MONTH.
Use CURSOR PAD E, G, H to highlight and select the DAY of the MONTH. Use CURSOR PAD E, G, H to highlight and select the YEAR.
Use CURSOR PAD E, G, H to highlight and select Ant A or Ant B.
Use CURSOR PAD E, G, H or NUMBER buttons to set the channel the TV will tune into. A “√“ in the box means it is enabled.
NOTE: 1. When the INFO button is pressed, the Event Timer Icon will only display the current date ON/OFF timer.
2.The Off Timer will only activate if the TV was turned on by the On Timer and no channel selection was
made after this time. If you change the channel after the On Timer has been activated, the Off Timer will deactivate.
3.If no remote control button is pressed after viewing reservation is activated, the TV will automatically turn off after three hours. Therefore, do not Set Event Timer for more than three hours if you do not plan to control your television with the remote control.
CAUTION: Do not use your TV as a deterrent when away from home by using the On and Off Timers. For safety, the TV should be turned off when you are away from home.
ON-SCREEN DISPLAY
69
