Hitachi 42HDT51, 55HDT51 important safety instructions Input Access

HOW TO USE THE REMOTE “ENT” BUTTON TO ACCESS THE SPECIFIED INPUT OF THE PLASMA TV

INPUT ACCESS

This optional feature allows the user of the remote control to setup it’s ENTER (ENT) button to access the specified input of the TV. Setup for this feature is applicable to the remote control’s normal mode only and only applies to the DVD, CBL, STB, PVR and AMP modes.

1.Select the desired device mode (DVD, CBL, STB, PVR, or AMP) by using your SOURCE ACCESS buttons (F, E) to position the LED indicator to the corresponding selection.

2.Hold down the ENTER (ENT) button on the remote and enter the four digit preset code that matches your device as shown on pages 48-49.

3.Then enter the assigned input number (1-5) that the device is related to.

4.Release ENTER (ENT) button.

5.If done correctly, the device LED indicator will flash 3 times to confirm proper setup.

6.The remote will now control the desired device.

7.Pressing the ENTER (ENT) button will now access the video input (1-5) of the desired device.

SETUP EXAMPLE (Hitachi DVD with precode 0573 connected to INPUT 1 of the TV)

THE

1Select DVD mode by using your SOURCE ACCESS buttons (F, E) to position the LED indicator to DVD.

2Hold down the ENTER (ENT) button and press the numbers 0, 5, 7 and 3.

3Then press the number 1 for the assigned input number of the DVD player.

4Release ENTER (ENT) button.

5If done correctly, the device LED indicator will flash 3 times to confirm proper setup.

6The remote will now control the DVD player.

7Press the ENTER (ENT) button to instantly access the video input of your DVD on Input 1.

1, 5, 6 2, 4, 7 1

A/V NET

GUIDE

3

2

REMOTE CONTROL

NOTES: 1. This feature is optional.

2.Assigned input numbers can be used more than once if applicable.

47