Panasonic KX-TA624 Call Forwarding — to an Outside CO Line, 3-17, Telephone Features, Conditions

3.2 Telephone Features

C

Call Forwarding — to an Outside (CO) Line

You can forward calls to an external party.

System programming is required to execute this feature.

Setting

PT and SLT

FWD/DND

For a PT

71 For an SLT

3 line access code phone no. #

Lift the handset	For a PT: Press
or press	FWD/DND.
SP-PHONE/MONITOR.	For an SLT: Dial 71.

Dial 3. Enter the line	Enter the	Dial #. Confirmation	Hang up or press
access code	phone number.	tone and	SP-PHONE/MONITOR.
(9 or 81 through 86).		dial tone

<PT Display Example>

•When you dial line access code “9”:

FWD(All) All COs

•When you dial line access code “81 through 86”:

FWD(All) CO Gx

outside (CO) line group number

• The FWD/DND indicator light flashes red slowly.

Conditions

•If an incoming outside call is forwarded to an outside (CO) line, the “Outside-to- Outside (CO-to-CO) Line Call Duration Time” is applied to the call and the line will be disconnected when it expires (default: 10 minutes). An alarm tone is sent to both parties fifteen seconds before the assigned duration time limit.

•Up to thirty-two digits (including the line access code) can be programmed.

•If a CPC signal is sent to an outside (CO) line before the assigned duration time limit, a call between two external parties will be disconnected.

•This feature cannot be used for incoming outside calls from lines assigned as “Normal”, by System Programming.

•An account code must be entered by pressing “ ” and entering the account code after the line access code in the account code verify-all and forced modes.

Programming References

•System Programming — Installation Manual

[205]Outside-to-Outside (CO-to-CO) Line Duration Time Limit [414]–[416] Outside (CO) Line Mode — Day/Night/Lunch

[605]Account Code Entry Mode

[607]Call Forwarding to an Outside (CO) Line

Telephone Features 3-17