Panasonic KX-TA624 user manual 3-43, Telephone Features, Conditions, Programming References

Models: KX-TA624

1 214
Download 214 pages 49.67 Kb
Page 99
Image 99
3-43

3.2 Telephone Features

C

Conditions

PT

SLT

SLT

The default setting for Call Waiting is “disabled”.

When Call Waiting is enabled, a Call Waiting tone is sent to the user under the following conditions.

1)When an outside call is received, or

2)When another extension executes the “Busy Station Signaling (BSS)” feature.

Setting “Data Line Security” temporarily cancels this feature.

You can change the desired Call Waiting tone (Tone 1 or Tone 2).

If a Call Waiting tone is heard and the CO or INTERCOM indicator does not flash, this tone indicates Call Waiting from your telephone company. In this case, see “Call Waiting from a Central Office” or “External Feature Access”.

If “Hold-2” or “Hold-3” is assigned in System Programming, you must dial “20” after flashing the hookswitch.

You cannot transfer the new call while holding the current call. If you want to do so, first park the original call using the Call Park feature; then hang up; then take the new call.

Programming References

Station Programming (Section 2) Call Waiting Tone Type Assignment

System Programming — Installation Manual

[104]Hold Mode Selection

Feature References

Busy Station Signaling (BSS)

Call Park

Call Waiting from a Central Office

Data Line Security

External Feature Access

Telephone Features

3-43

Page 99
Image 99
Panasonic KX-TA624 user manual 3-43, Telephone Features, Conditions, Programming References, Feature References