Panasonic KX-TA624 One-TouchDialing Button Assignment, Station Programming Personal Programming

2.2 Station Programming (Personal Programming)

One-Touch Dialing Button (Assignment)

Allows you to assign a Flexible button (CO, DSS, MESSAGE, PF) as a One-Touch Dialing button.

—Be sure that you are in the Station Programming mode. Set the MEMORY switch to “PROGRAM”.

PT

CO

(No.MESSAGE )+ 2

PF

Press the desired Flexible button you wish to assign as a One-Touch Dialing button and dial 2, or press the desired PF button.

desired number	AUTO DIAL
		STORE
Enter the desired number	Press STORE.
(extension number,
phone number, etc.).

<PT Display Example>

Not Stored

•The STORE indicator lights.

•The display shows the initial programming mode.

•Up to 24 digits can be stored.

•To erase an incorrect entry, press the TRANSFER (CLEAR) button.

(The TRANSFER button becomes the CLEAR button during programming.)

—To exit the Station Programming mode, set the MEMORY switch to “SET”

Conditions

•The number can be an extension number, telephone number or feature number. Up to twenty-four digits can be stored in a One-Touch Dialing button.

•To store the telephone number of an external party, a line access code (9 or 81 through 86) must be stored as the first digit.

•You can store a number consisting of twenty-five digits or more by dividing and assigning it into two One-Touch Dialing buttons. In this case, the line access code should be stored in the first button.

•To store an account code, press and then enter the desired code. The account codes must be stored after the line access code.

•You can use 0 through 9, , #, PAUSE and INTERCOM for storing.

#:	change the dialing mode (Pulse to Tone)
PAUSE:	pause
INTERCOM:	secret

2-14Station Programming (Personal Programming)