Panasonic KX-TA624 user manual 3-39, Telephone Features, Conditions, Programming References

Models: KX-TA624

1 214
Download 214 pages 49.67 Kb
Page 95
Image 95
3-39

3.2 Telephone Features

C

Conditions

PT

PT

PT

PT

SLT

SLT

If the destination extension does not answer the call within a pre-determined time (default: 30 seconds), “Transfer Recall” occurs.

If there is no answer within thirty minutes after “Transfer Recall” starts, the line will be disconnected.

When the dialed extension is busy, you may access the extension by dialing “2” (Busy Station Signaling) or “3” (Executive Busy Override) and going on-hook.

If you want to return to the held call, press the TRANSFER button or corresponding CO or INTERCOM button before the destination extension answers.

When “Transfer Recall” occurs, the display will show the following: <Example>

RCL: Ext 101

A flexible CO button can be assigned as a DSS button.

To use “One-Touch Transfer”, System Programming is required.

If you want to return to the held call, flash the hookswitch before the destination extension answers.

If “Hold-3” is assigned in System Programming, you must dial “20” after flashing the hookswitch.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — Direct Station Selection (DSS) Button

System Programming — Installation Manual

[005]One-Touch Transfer Using a DSS Button

[104]Hold Mode Selection

[201]Transfer Recall Time

Feature References

Call Transfer, Screened – to Extension (See the Installation Manual.) Call Transfer, Unscreened – to Extension (See the Installation Manual.) One-Touch Transfer Using a DSS Button (See the Installation Manual.)

Telephone Features

3-39

Page 95
Image 95
Panasonic KX-TA624 user manual 3-39, Telephone Features, Conditions, Programming References, Feature References