Hitachi 55HDT51, 42HDT51 important safety instructions Horizontal Clock, Clock Phase

RGB ON SCREEN DISPLAY

Adjusts the pixel clock frequency to reduce the vertical stripe.

HORIZONTAL CLOCK

USING THE RGB INPUT

Setup		Adjust
Auto Adjust
Horizontal Position		0
Vertical Position		0
Horizontal Clock		0
Clock Phase		0
Reset		Reset
Input Level		0.7V
Black Side Panel		Off
Move	SEL Select

Use CURSOR PAD F, E to adjust the horizontal clock. Press the MENU button to return to previous menu. Press EXIT to quit.

NOTE: Due to varying signal content, you may see vertical or horizontal lines bend occasionally in RGB mode. However, this

phenomenon is not a defect. It’s caused by a lack of picture content due to under-scanning in RGB mode.

CLOCK PHASE

Adjusts the phase to correct blurred or unstable images.

Setup		Adjust
Auto Adjust
Horizontal Position		0
Vertical Position		0
Horizontal Clock		0
Clock Phase		0
Reset		Reset
Input Level		0.7V
Black Side Panel		Off
Move	SEL Select

Use CURSOR PAD F, E to adjust the clock phase. Press the MENU button to return to previous menu item. Press EXIT to quit.

RESET

Set HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE to factory preset, for current RGB format.

Setup		Adjust
Auto Adjust
Horizontal Position		0
Vertical Position		0
Horizontal Clock		0
Clock Phase		0
Reset		Reset
Input Level		0.7V
Black Side Panel		Off
Move	SEL Select

Use CURSOR PAD F, E to highlight Reset.

Press the SELECT button to RESET to factory preset settings.

86