CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5
1.Connect the cable from the
2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4.Press the INPUTS button, then select INPUT 3 from the INPUTS menu to view the program from the VCR or laserdisc player. The VIDEO OSD label disappears automatically after approximately four seconds.
5.Select Antenna from the INPUTS menu to return to the previous channel.
FIRST TIME USE
ANT A
HDMI 1
| ANT B |
| INPUT 2 | INPUT 1 |
|
| Y/ | Y/ | |
|
|
| ||
MONITOR OUT | INPUT 4 | INPUT 3 | VIDEO | VIDEO |
|
| |||
|
|
|
| |
|
|
| PB | PB |
|
|
| PR | PR |
VIDEO |
|
|
|
|
| (MONO) | (MONO) | (MONO) | (MONO) |
L |
|
|
|
|
AUDIO |
| TV AS CENTER |
| |
R |
|
|
|
|
AUDIO |
|
|
|
|
TO |
|
|
|
|
CableCARD
(Top of card faces right)
OPTICAL OUT
Digital Audio
Upgrade Card
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; and 6,381,747 licensed for limited viewing uses only.
RS232C
1 2 3 4 5
6 7 8 9
R L V
VCR
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.
2.A single VCR can be used for VCR #1 and VCR #2 (see page 12), but note that a VCR cannot record its own video or line output. Refer to your VCR operating guide for more information on line
17
