AUDIO
Use the functions below if your TV is connected to an amplifier/receiver with optical digital input with Dolby Digital or PCM decoder capabilities.
Audio |
|
|
|
|
Treble |
| 45% |
|
|
Bass |
| 50% |
|
|
Balance |
|
| L | R |
Sound Enhancement | Off |
|
| |
Audio Source |
| Stereo |
| |
Internal Speakers | On |
|
| |
Auto Noise Cancel | On |
|
| |
Perfect Volume |
| On |
|
|
Loudness |
| On |
|
|
Move | Change Value | SEL | Return |
|
Audio
| Language |
|
|
| 1 [English ] |
|
|
|
|
| Dolby Digital |
| Digital Output |
|
|
| |
|
|
|
|
| Off |
| DRC |
|
|
| |
|
|
|
|
| |
| Move | Select | SEL Return | ||
Language
Digital
Output
DRC
Some programs transmit more than one DTV language option. Most will have English as a default language. The language function will allow you to select up to 4 language options (if available).
This function allows you to select between Dolby® Digital and PCM.
Dolby® Digital - Select this feature if the TV is connected to an amplifier/receiver with a Dolby® Digital only decoder; it will provide six independent soundtrack channels through the optical output jack (Digital Audio).
PCM - Select this feature if the TV is connected to an amplifier/receiver with a PCM only decoder; it will provide two independent soundtrack channels through the optical output jack (Digital Audio).
Dynamic Range Compression - Use this function to compress the range of sound volume. By compressing the range of sound volume, it is possible not only to suppress the output of loud sound at night but also to raise the volume of low sound. This is only effective when the TV is connected via the optical out (digital audio) to an amplifier/receiver with a Dolby® Digital decoder. The default setting is ON.
Use the CURSOR PAD , to select the chosen options.
NOTE: *Manufactured under license from Dolby Laboratories. “Dolby” and the
NOTE: These functions are only available when viewing digital programs.
ON-SCREEN DISPLAY
49
