Manuals / Hitachi / Computer Equipment / Personal Computer

Hitachi 8000 Elite manual Store the removed card in anti-staticpackaging, Enww

Models: 8000 Elite

1 64

Download 64 pages 7.46 Kb

Page 29

9.Store the removed card in anti-static packaging.

9.Store the removed card in anti-static packaging.

10.If you are not installing a new expansion card, install an expansion slot cover to close the open slot.

CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation.

11.To install a new expansion card, slide the bracket on the end of the card down into the slot on the back of the chassis and press the card down firmly into the socket on the system board.

Figure 2-14Installing an Expansion Card

NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot.

12.Close the expansion card retention latch, making sure that it snaps firmly into place.

13.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed.

14.Replace the computer access panel.

15.Reconnect the power cord and turn on the computer.

16.Lock any security devices that were disengaged when the computer access panel was removed.

17.Reconfigure the computer, if necessary.

ENWW	Removing or Installing an Expansion Card 23

Image 29

Hitachi 8000 Elite manual Store the removed card in anti-staticpackaging, 14 Installing an Expansion Card, Enww

Contents

Hardware Reference Guide Hardware Reference Guide About This Book ENWW iv About This Book2 Hardware Upgrades Table of contents1 Product Features Appendix A Specifications Standard Configuration Features 1 Product Features2 Chapter 1 Product Features Front Panel ComponentsFigure 1-2 Front Panel Components ENWWTable 1-2 Media Card Reader Components Media Card Reader ComponentsSlot Media4 Chapter 1 Product Features Rear Panel ComponentsFigure 1-4 Rear Panel Components ENWWKeyboard Using the Windows Logo KeyTable 1-4 Keyboard Components Table 1-5 Windows Logo Key FunctionsENWW 6 Chapter 1 Product FeaturesTable 1-5 Windows Logo Key Functions continued arrowSerial Number Location Warnings and Cautions 2 Hardware UpgradesServiceability Features Smart Cover FailSafe Key Unlocking the Smart Cover LockENWW 10 Chapter 2 Hardware UpgradesFigure 2-1 Removing the Smart Cover Lock Screws Removing the Computer Access Panel Figure 2-3 Replacing the Computer Access Panel Replacing the Computer Access Panel12 Chapter 2 Hardware Upgrades ENWWRemoving the Front Bezel Removing Bezel Blanks Figure 2-6 Replacing the Front Bezel Replacing the Front BezelENWW Replacing the Front BezelDDR3-SDRAMDIMMs Installing Additional MemoryDIMMs Populating DIMM Sockets on page Installing DIMMs9.Replace the access panel 2 Figure 2-8 Installing a DIMMInstalling Additional Memory A DIMM must occupy the black XMM1 socketRemoving or Installing an Expansion Card Removing or Installing an Expansion Card 5.Remove the computer access panelFigure 2-10 Opening the Expansion Slot Retainer Figure 2-11 Removing an Expansion Slot CoverENWW 22 Chapter 2 Hardware Upgrades14.Replace the computer access panel Figure 2-14 Installing an Expansion Card17.Reconfigure the computer, if necessary Removing or Installing an Expansion CardDrive Positions Removing a Drive from a Drive Bay ENWW 26 Chapter 2 Hardware UpgradesRemoving a Drive from a Drive Bay 7.Remove the drive from the drive bay as followsENWW Figure 2-21 Removing a Hard Drive 28 Chapter 2 Hardware Upgrades8.Store the removed drive in anti-staticpackaging ENWWInstalling Additional Drives System Board Drive Connections 5.Remove the computer access panel 14.Reconfigure the computer, if necessary ENWW 5.Remove the computer access panelInstalling Additional Drives 10.Replace the computer access panel ENWW Installing Additional DrivesFigure 2-30 Removing the Thermal Sensor ENWW 36 Chapter 2 Hardware UpgradesENWW Installing Additional DrivesFigure 2-33 Replacing the Hard Drive Figure 2-35 Replacing the Thermal Sensor 38 Chapter 2 Hardware UpgradesFigure 2-36 Replacing the Carrier Cover ENWW5.Remove the computer access panel ENWW 40 Chapter 2 Hardware Upgrades5.Remove the computer access panel ENWW 42 Chapter 2 Hardware UpgradesENWW Table A-1 Specifications A SpecificationsDesktop Dimensions Tower DimensionsPower Supply Table A-1 Specifications continuedPower Output 115VB Battery Replacement Type TypeType ENWW 8.Replace the computer access panel48 Appendix B Battery Replacement HP/Kensington MicroSaver Security Cable Lock Installing a Security LockC External Security Devices HP Business PC Security Lock PadlockFigure C-2 Installing a Padlock 50 Appendix C External Security DevicesENWW Installing a Security LockFront Bezel Security Installing a Security Lock 9.Replace the access panel7.Replace the front bezel ENWWGrounding Methods D Electrostatic DischargePreventing Electrostatic Damage Computer Operating Guidelines and Routine Care Cleaning Optical Drive PrecautionsSafety Shipping PreparationIndex