![](/images/new-backgrounds/1104939/10493947x1.webp)
Ch 2: Installation and Use of Devices
Internal DLT (Optional)
4. Handle operation lamp
1. Cartridge insertion slot |
| 5. Cleaning tape use lamp |
| ||
|
|
6.
7. Write inhibition lamp
8.Recording density display lamps
3. | 2. Unload button |
|
|
9. Cartridge insert/eject handle
1.Cartridge insertion slot
Insert a cartridge into the drive from this slot. See “Inserting and Ejecting a Cartridge” on page 22 for procedures of inserting and ejecting cartridges.
2.Unload button
Used to eject the cartridge.
3.Recording-density change button
This button cannot change the recording density applicable when data is written to a cartridge. Even if you press this button to change the recording density, the recording density for writing data is fixed at 20.0 format (the maximum recording density for uncompressed data is 20GB). Use ARCserve to specify whether compressed or uncompressed write is to be used. See the manual for ARCserve for details of specification methods. The initial status is compressed write (the Compress lamp is on).
4.Handle operation lamp
5.Cleaning tape use lamp
6.
20 | Hitachi PC VisionBase 8450H/R Server |