Chapter 1 – Introduction and Placement

Placement -- Table Stands / Wall Mount Brackets:

The Sound Bar is shipped with the table stands attached. Position the Sound Bar on a secure table or shelf as noted in the Safety Instructions to avoid damage or injury.

The table stands can also be removed and re-attached for wall mounting. Please carefully read the wall mounting information provided below.

CAUTION: Wall Bracket Installation: Only a professional installer should install the Sound Bar onto the wall. Dangerous voltages exist inside walls and extreme caution must be exercised to avoid injury or deadly electrical currents. High pressure water and natural gas pipes are also hidden in walls and only professionals are trained to avoid in-wall hazards.

Tips For Professionals: Follow the instructions below for wall mounting the Sound Bar.

Place the Sound Bar on a secure surface and remove the table stands from the Sound Bar using a slotted screw driver of appropriate size. See Figure 1.

1.Reverse the stands and securely re-attach them to the Sound Bar as shown in Figure 2.

2.Measure and attach wall fasteners that are appropriate to the type of wall (drywall, masonry, etc.) and fasten them securely.

Wall anchors are not provided by Hitachi.

3.Insert screws (not included) into wall, leaving enough of the screws protruding from the wall to slide into the key slots of the Sound Bar brackets.

4.Secure the Sound Bar onto the screws.

:NEVER PLACE OBJECTS ON TOP PANEL OF SOUND BAR – IT IS NOT A SHELF.

Figure 1

Figure 2

NOTE: Your product may vary in finish or appearance from the photographs in this Owner’s Guide.

5