![](/images/backgrounds/10127/10127-246x1.png)
The Front Panel shows the status of the Sound Bar using high efficiency light emitting diodes (LEDs). When you press a button on the Sound Bar remote control or top panel controls, the LED lights indicate the operation of the Sound Bar.
① | ② | ③ | ④ ⑤ |
⑥ | ⑦ | ⑧ ⑨ |
Illuminates for about 15 seconds when power is turned “On”.
②Enhances low frequencies at low volume levels.
③Reduces sudden loud sounds and simultaneously raises whispers for easy listening.
④3D/SURR:Press the remote’ 3D/SURR button to switch from “3D” (blue LED) to “Surround” sound effects (LED turns green). Press again to turn effects and LED off.
⑤Remote Control Sensor:For best response point the remote control directly at this area from roughly 30 degrees to the left, right, up or down. The remote control range is approximately 30 feet. Do not put obstacles between the remote control and the sensor window.
⑥Bluetooth Light:Illuminates when the Bluetooth input is selected.
⑦Volume/Input indicator:Seven lights indicates the volume level, input source selection and Tone modes.
⑧HA mode:The HEARING AID mode enhances certain frequencies for the hearing impaired.
⑨PWR indicator:Indicates the Sound Bar’s power “On” or “Off” status.
6