Chapter 5 – Controlling the Sound
Basic Features and Indicators:
The Sound Bar’s basic features (Power, Volume, Input selection) can be controlled by either the top panel control buttons or the remote control.
minmax
Power button:
This button turns the Sound Bar on & off. A soft blue LED ①glows when the power is on.
Volume buttons:
Press the top panel or remote control VOL+ or VOL- buttons to raise or lower the Sound Bar speaker’s volume. The number of lighted LEDs increase as the volume is raised and decrease as the volume is lowered. The Volume indicator lights will turn off after about five (5) seconds. When MUTED the volume LEDs will blink at the current volume setting.
Input buttons:
When the top panel INPUT button or the INPUT, D1/D2 or L1/L2 buttons on the remote control are pressed, the front panel LED indicators begin flashing, and then go off after a few seconds. The INPUT button cycles through each Sound Bar input in the order shown below.
|
|
|
|
Selected Input | Indicator | Description |
|
|
|
|
|
D1 |
| D1 LED will briefly flash. |
|
(Digital Optical) |
|
| |
|
|
| |
|
|
|
|
D2 |
| D2 LED will briefly flash. |
|
(Digital Coaxial) |
|
| |
|
|
| |
|
|
|
|
Bluetooth |
| Bluetooth logo begins flashing. |
|
(Digital Wireless) |
|
| |
|
|
| |
|
|
|
|
L1 |
| L1 LED will briefly flash. |
|
(Analog Line In) |
|
| |
|
|
| |
|
|
|
|
L2 |
| L2 LED will briefly flash. |
|
(Analog 3.5mm) |
|
| |
|
|
| |
|
|
|
|
|
|
|
|
16