Hitachi C 10FCH2 and C10FCE2 manual 6

English

SPECIFICATIONS

Item	Model	C 10FCH2 / C 10FCE2
Motor	Type	Series commutator motor
	Power source	Single-phase AC 60Hz
	Voltage (Volts)	120
	Full-load current (Amp)	15
Laser Marker	Maximum output	<1mW	CLASS II Laser Product
(Only Model	Wave length	400 – 700 nm
C10FCH2)	Laser medium	Laser Diode
Applicable		Outside Dia. 10 in. (255mm)
saw blade		Hole Dia. 5/8 in. (15.9mm)
No load speed		5000/min
Max.		Head	Turntable	Max. sawing dimension
sawing	Miter	0	0	Max. Height	2-5/16 in.	(59mm)
dimension				Max. Width	5-21/32 in.	(144mm)
				or	3-1/2 in.
				Max. Height		(89mm)
				Max. Width	3-31/32 in.	(101mm)
		0	Left 45°	Max. Height	2-5/16 in.	(59mm)
				Max. Width	4 in.	(102mm)
	Bevel	Left 45°	0	Max. Height	1-5/8 in.	(41mm)
				Max. Width	5-21/32 in.	(144mm)
	Compound	Left 45°	Left 45°	Max. Height	1-5/8 in.	(41mm)
				Max. Width	4 in.	(102mm)
Miter sawing range		Left 0° – 52° Right 0° – 52°
Bevel sawing range		Left 0° – 45°
Compound sawing range		Left (Bevel) 0° – 45°, Left and Right (Miter) 0° – 45°
Net weight		26.5 lbs. (12 kg) / 26.3 lbs. (11.9 kg)
Cord		2 Conductor type cable 6ft. (1.8m)

ACCESSORIES

WARNING:

Accessories for this power tool are mentioned in this Instruction Manual.

The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

STANDARD ACCESSORIES

1 10 in. (255mm) TCT Saw	2 Dust bag (1 piece)	4 10mm BOX wrench	6 Sub fence
blade (1 piece) (For wood)		(1 piece)	(1 piece)

	For how to use, refer to
	page 13.
	3 Vise Assembly w/knob bolt	5 4mm Hex. bar wrench	7 Flat screw
	(1 piece)	(Only C10FCH2)	(1 piece)
(No. of teeth 24
Code No. 318963)
	For how to use, refer to	For how to use, refer to
	page 10.	page 10.
8 M6 Nylon nut	9 Plate (A)	0 Holder (B)	A Side handle
(1 piece)	(1 piece)	(1 piece)	(1 piece)

Fig. 3

6