English
2. Adjusting the angle of inclination
WARNING:
If the lever (A) is loose, injury can result. Tighten it securely after adjustment.
You can incline saw blade from 0˚ to a maximun angle of 45˚ in relation to the base.
As shown in Fig. 11 by loosing the lever (A) on the bevel scale, the saw blade may be inclined to an angle of 45˚ in relation to the base.
Always ensure that the lever (A) is thoroughly tightened after making the desired adjustment.
3.Regulating the guide (Rip fence) (Fig. 12, 13)
........................................ Optional Accessory
Install the wing bolt (B) and lock spring on the base. Insert the guide into the base, move it left and right and adjust the cutting position. Tighten the wing bolt (B) and fix the guide. The guide can be installed either from the left or the right side of the main body.
Lever (A)
0˚ – 45˚
Fig. 11
Wing
Bolt (B)
Lock
Spring
Base
Fig. 12
Wing Bolt (B), Lock Spring
Base
Guide
(Rip Fence)
Fig. 13
12