WARNING

Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints

Crystalline silica from bricks, cement and other masonry products

Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles.

PRODUCT SPECIFICATIONS

MOTOR

 

Power source

120 V, AC, 60 HZ, 7AMPS.

Speeds Low

1410 F.P.M

 

(Feet per minute)

High

2600 F.P.M

Horsepower

1HP(Max. Developed)

DRIVE BELT

A 26

Cutting Capacity

 

Throat

12”

Height

5”

Blade

 

Width

1/8”, 1/4”, 3/8”, 1/2”

Length

80”

Table

 

Size

13” x 13”

Tilt

0° Left –– 45° Right

DUST COLLECTION

Yes

NET WEIGHT

145.5 LB (66.0Kg.)

WARNING

To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection.

Use a separate electrical circuit for your tools.

Your Band Saw is wired at the factory for 120V operation. Connect to a 120V, 15 AMP branch circuit and use a 15 Amp time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way.

— 3 —

Page 3
Image 3
Hitachi CB 13F instruction manual Product Specifications, Motor, Drive Belt, Dust Collection, NET Weight