ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
WARNING
To avoid injury:
⬤Use only accessories recommended for this band saw.
⬤Follow instructions that accompany accessories. Use of improper accessories may cause hazards.
⬤Use only accessories designed for this band saw to avoid injury from thrown broken parts or workpieces.
⬤Do not use any accessory unless you have completely read the instruction or operator’s manual for that accessory.
ITEM
Blade width: 1/8”,1/4”,3/8”,1/2”
Blade length: 80”
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the band saw and all its parts, and compare against the illustration following. Place the saw on a secure surface and examine it carefully.
WARNING
⬤To avoid injury from unexpected starting, do not plug the power cord into a power source receptacle during unpacking and assembly. This cord must remain unplugged whenever you are assembling or adjusting the saw.
⬤Although compact, this saw is heavy. To avoid back injury, get help whenever you have to lift the saw.
⬤If any part is missing or damaged, do not plug the band saw in until the missing or damaged part is replaced, and assembly is complete.
TABLE OF LOOSE PARTS
ITEM | DESCRIPTION | QUANTITY |
BAND SAW: |
| |
A. | Band saw with motor | 1 |
B. | Table with extension wing | 1 |
C. | Trunnion support bracket | 1 |
D. | Miter gauge | 1 |
E. | Sawdust port | 1 |
F. | Power cord hooks | 2 |
| Foot pads | 4 |
G. | Hex. Bolt & nuts | 1 |
H. | Hex. Bolt | 4 |
I. | Knobs | 2 |
J. | Hex. Key | 1 |
K. | Screws | 2 |
L. | Long hex. Bolt | 1 |
M. | Hex. Nuts | 4 |
N. | Large washers | 8 |
LEG STAND: |
| |
O. | Leg stand top plate | 1 |
P. | Short lower brackets | 2 |
Q. | Long lower brackets | 2 |
R. | Legs | 4 |
S. | Bag: |
|
| Carriage bolts | 32 |
| Hex. Nuts | 32 |
| Washers | 32 |
— 7 —
