English
WARNING
For Your Own Safety Read This Instruction Manual Before Operating The
1.Always wear eye protection, when using the tool.
2.Always keep hands out of the line of the
3.Never operate the tool without the guards in place.
4.Never perform any freehand operation with the tool.
5.Never reach around the
6.Always shut off the power and wait for the
FOREWORD
The information contained in this manual is designed to assist you in the safe operation and maintenance of the POWER TOOL. Some illustrations in this manual may show details or attachments that differ from those on your own POWER TOOL.
REPLACEMENT PARTS
When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service center.
POLARIZED PLUGS
To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.
DOUBLE INSULATION FOR SAFER OPERATION
To ensure safer operation of this electric power tool, HITACHI has adopted a double insulation system. “Double insulation” as used here, means a system of two insulations physically separated and arranged between electrically conductive materials connected to the power supply and to the outer frame handled by the operator. Therefore, the nameplate shows both the “ ” mark and “Double insulation” or either one on the power tool.
Although this system has no external grounding, you must still follow the normal safety precautions given in this manual.
To keep the double insulation system effective, follow these precautions;
*To avoid lessening the double
*Clean the exterior of the tool with a soft cloth moistened in soap water, and dry thoroughly.
Don’t use chloric solvent, gasoline or thinner on plastic components; otherwise they might dissolve.
7
