English
8. How to use the dust box (Fig. 17)
Wing
Bolt
Base
Dust Box
Fig. 17
WARNING: To prevent an accident or personal injury, always turn off the trigger switch and disconnect the power plug from the receptacle before cleaning
(1)Remove the wing bolt and pull the dust box out of the machine.
(2)Empty the dust box and cleaning the machine.
(3)The dust box return into the machine and tighten the wing bolt securely.
CAUTION: ⬤ Be sure to install removed wing bolt.
To prevent an accident and personal injury.
⬤Do not touch any part of the dust box except its handle immediately after operation; it may be extremely hot and could burn your skin.
9. How to use the stopper (Fig. 18)
The stopper facilitates continuous same length cutting.
(1) Loosen the hex head socket screw and pull the holder
Stopper (2) Loosen the wing bolt and set the stopper
(3) Tighten the wing bolt and hex head socket screw
Wing Bolt
Holder
Hex Head Socket Screw
Fig. 18
SAW BLADE DISMOUNTING AND MOUNTING
WARNING: To prevent an accident or personal injury, always turn off the trigger switch and discon- nect the power plug from the receptacle before dismounting or mounting the saw blade.
CAUTION: Use only 17mm wrench provided to install or remove the blade. Failure to do so may result in overtightening or insufficient tightening of the bolt. This could cause serious injury to operator or others in the general vicinity of the tool.
1.Dismounting the saw blade (Fig. 19-a and Fig. 19-b)
(1)Loosen the machine screw and move the sub cover unitl it touches the bolt.
(2)Press spindle lock, and loosen bolt with 17 mm wrench. If the spindle lock can not be easily pressed into fix the saw blade spindle, turn the bolt by wrench while applying pressure on the spindle lock. The saw blade spindle is fixed when the spindle lock is pressed in ward.
(3)Removing the bolt, wheel washer and the saw blade.
WARNING: Be very carefull when removing the saw blade after it has been used for cutting several materials in succession, since the saw blade maybe very hot.
16
