English

Fueling

WARNING

●Always shut off the engine before refueling.

●Slowly open the fuel tank, when filling up with fuel, so that possible over-pressure disappears.

●Tighten the fuel cap carefully, after fueling.

●Always move the trimmer at least 10 ft (3 m) from the fueling area before starting.

●Always wash any spilled fuel from clothing immediately with soap.

●Be sure to check for any fuel leakage after refueling.

Before fueling, clean the tank cap area carefully, to ensure that no dirt falls into the tank. Make sure that the fuel is well mixed by shaking the container, before fueling.

Starting

CAUTION

Before starting, make sure the cutting attachment does not touch anything.

1.Set ignition switch (24) to ON position. (Fig. 21, 22)

24

26

Fig. 21

24

Fig. 22

*Push priming bulb (25) several times so that fuel flows through return pipe (39). (Fig. 23)

25

39

Fig. 23

2.Set choke lever (27) to CLOSED position (A). (Fig. 24)

B

A

27

Fig. 24

3.Pull recoil starter briskly, taking care to keep the handle in your grasp and not allowing it to snap back. (Fig. 25)

Fig. 25

12