English

Attach the protection tube to the drive shaft or handle using cord clamps (8). (Fig. 5)

8

Fig. 5

NOTE

If the protection tube is set apart from the handle or pipe, it will be caught by something during operation and it may cause serious injury. Do not set the protection tube apart from the handle or pipe.

Throttle wire / stop cord

Press the upper tab (9) and open the air cleaner cover. (Fig. 6)

9

Fig. 6

Connect stop cords. (Fig. 7)

Fig. 7

If the throttle outer end (10) is threaded on your unit, screw it and the earth terminal (11) (if so equipped) into the cable adjuster stay (12) all the way, and then tighten this cable end using the adjuster nut (13) against the cable adjuster stay (12).

Connect throttle wire end (14) to carburetor (15) and install swivel cap (16) (if so equipped) where is included in tool bag, onto swivel (15) (Fig. 8).

Some models may come with the parts installed.

11 12

15

16

10

14

13 Fig. 8

Installation of blade guard (Fig. 9, 10, 10-1, 11)

Fig. 9

Fig. 10

Fig. 10-1

8