Connecting with your devices (continued)
|
| Microphone | Speakers |
Monitor | system | (with an amplifier) | |
| RGB IN |
|
|
|
|
| R L |
USB storage |
|
|
|
device | USB TYPE B HDMI | COMPUTER IN2 | COMPUTER IN1 |
USB |
|
|
|
TYPE A |
|
|
|
DC5V |
|
|
|
0.5A |
|
|
|
|
| MIC AUDIO IN1 AUDIO IN3 | AUDIO OUT |
CONTROL |
|
|
|
ENGLISH
AUDIO IN2 |
| VIDEO |
WARNING ►Use only the appropriate accessories. Otherwise it could cause a fire or damage to the device and the projector.
-Use only the accessories specified or recommended by the projector’s manufacturer. Consult your dealer when the required accessory did not come with the product or the accessory is damaged. It may be regulated under some standard.
-For a cable with a core at only one end, connect the end with the core to the projector. That may be required by EMI regulations.
-Neither disassemble nor modify the projector and the accessories.
-Do not use the damaged accessory. Be careful not to damage the accessories. Route a cable so that it is neither stepped on nor pinched out.
CAUTION ►Do not turn on or off the projector while connected to a device in operation, unless that is directed in the manual of the device.
►Be careful not to mistakenly connect a connector to a wrong port.
►Before connecting the projector to a network, be sure to obtain the consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive voltage.
►Before removing the USB storage device from the port of the projector, be sure to use the REMOVE USB function on the thumbnail screen to secure your data. NOTICE ►Use the cables with straight plugs, not
ports of the projector are recessed.
NOTE • If a loud feedback noise is produced from the speaker, move the
microphone away from the speaker.
•This projector doesn't support
•The COMPUTER IN1/2 port can support a component signal also. The specific adapter or the specific cable is required for a component video input to the projector.
7
