Hitachi CP-RS56, CP-RX61 Connecting power supply

Firmly plug the power cord's plug into the outlet.

Setting up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and/or electrical shock.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Only plug the power cord into an outlet rated for use with the power cord's specified voltage range.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

Before connecting, make sure that the power switch is the OFF position (pressed the side marked “O”).

Power switch

AC inlet

Connector of the power cord

1. Connect the connector of the power cord to the AC inlet of the projector.

Contents

About this manual Contents Projector features About contentsof package Part names Projector Controls Remote control Preparations Fastening the lens cover Putting batteries Using the remote control About the filter cover for bottom-upuse Settingup Arrangement Adjusting the projector's elevator Connecting your devices Examples of connection with a computer Connecting to a monitor (output) Connecting to a speaker with amplifier (output) Examples of connection with a VCR/DVD player Connecting power supply Power on/off Turning on the power Turning off the power Operating Adjusting the volume Temporarily muting the sound Selecting an input signal Searching an input signal Selecting an aspect ratio Adjusting the zoom (Optical) Adjusting the zoom (Digital) Adjusting the focus Using the automatic adjustment feature Adjusting the position Correcting the keystone distortions Using the partial magnify feature Freezing the screen Temporarily blanking the screen Multifunctionalsettings Using the menu function (2)PICTURE of Advance MENU → one of Advance Menus (ex. SETUP menu) (3) Advance Menu → EASY MENU 3. To choose the target item (1) At EASY MENU (ex. KEYSTONE) (2) At Advance Menu (ex. KEYSTONE) Page EASY MENU EASY MENU (continued) PICTUREmenu PICTURE menu (continued) Page IMAGEmenu IMAGE menu (continued) INPUTmenu INPUT menu (continued) SETUP menu SCREEN menu SCREEN menu (continued) below Page OPTION menu OPTION menu (continued) Page Maintenance Lamp WARNING Lamp (continued) To prepare a new lamp, contact your dealer and tell the lamp type number Type number = DT00701 2. Prepare a new lamp In the case of replacement by yourself Air filter Air filter (continued) Other care Troubleshooting Related messages Regarding the indicator lamps Regarding the indicator lamps (continued) The cooling fan is not operating There is a possibility that the interior portion has become heated has become overcooled Phenomena that may easily be mistaken for machine defects The electrical power cord is not plugged in The power switch is not set to the on position of these has not been properly fixed Phenomena that may easily be mistaken for machine defects (continued) The lens cover is closed The signal cables are not correctly connected and play monitor Color settings are not correctly adjusted Warranty and after-service Specifications